FIBER PROTECTIVE SLEEVES & MECHANICAL

1. Fiber Fusion Splice Protective Sleeves
2. SUN-QCMS100 Quick Connection Mechanical Splicer

1. Fiber Fusion Splice Protective Sleeves

Standard Single-fiber

Ribbon Fiber Single Zirconia

Ribbon Fiber Dual Zirconia

Features:
• Heat-bonded assembly
• Outer tube in compliance with CHINA YD/T1024--1999
• Completed shrink in compliance with CHINA YD/T1024--1999
• Custom lengths available
• Color-coded outer tubes available
• Choice of materials for mass fusion sleeves
• No influence on the fiber's transmission
• Splice point protection and intensity improvement 
• Easy operation and reduction of the risk of mangling fiber
• External tube clearly showing the status of connection
• Airproof configuration keeping the splice point's good resistance of humidity and temperature
• Operating temperature ranging from -45℃ to 100℃

	Standard Single Fiber			Ribbon Fiber Single/Dual Zirconia
	External  Tube	Internal  Tube	Steel Needle	External  Tube	Internal  Tube	Ceramic
Material	XLPO	EYA	201 Stainless Steel	XLPO	EYA	Include95%  alumina

Length: 25mm;  40mm;  60mm
Diameter: Ø1.5mm (Standard Single Fiber)

Ordering Information:
SUN-PS-SF25: Single fiber, length 25mm
SUN-PS-SF40: Single fiber, length 40mm
SUN-PS-SF60: Single fiber, length 60mm
SUN-PS-RFS25: Ribbon fiber single zirconia, length 25mm
SUN-PS-RFS40: Ribbon fiber single zirconia, length 40mm
SUN-PS-RFS60: Ribbon fiber single zirconia, length 60mm
SUN-PS-RFD25: Ribbon fiber dual zirconia, length 25mm
SUN-PS-RFD40: Ribbon fiber dual zirconia, length 40mm
SUN-PS-RFD60: Ribbon fiber dual zirconia, length 60mm

2. Quick Connection Mechanical Splicer                                                                Top

2.1 SUN-QCMS100

SUN-QCMS Series Mechanical Splicer is a light weight and easy-to-operate device that applied to splice all standard optical fibers (from 250um to 900um, both single-mode and multimode) mechanically. It quickens and simplifies the field connection and becomes the best solution for fixed connection of optical network.

Features:

Specially for fiber mating, no need for other assistant tools

Low loss mating

No need for power supply or heat supply

Cylinder structure, good for little loss mating

Transparent structure, good for observing

Specification:

Item	Parameter
Operating Time	Average: 3mins(from stripping to mating completely)
Dimensions	4mm×4mm×40mm (completely mating)
Cladding Diameter	125μm
Out Jacket Diameter	250μm/900μm
Mating Loss	Max.:0.3dB(Aver:0.18dB）
Return Loss	Max.: -40dB
Operating Temperature	-40℃ ~ 80℃

2.2 SUN-QCMS200

SUN-QCMS200-A	SUN-QCMS200-B

Features:

No require for adhesives or Epoxy

No require for fiber polishing

Easy-to-operate, fast installation

Auto alignment of fiber center

High popularity, support fibers with different dimensions (coating)

Structure:

Structure of SUN-QCMS200-A	Structure of SUN-QCMS200-B

Specification:

Item	SUN-QCMS200-A	SUN-QCMS200-B
Applicable for	3.1 x 2.0 mm Drop cable	φ0.25 mm &φ0.90 mm Fiber
Optical fiber diameter	125um (657A & 657B)	125um (652 & 657)
Tight buffer diameter	250um	250um
Fiber mode	Single mode	Single & multi mode
Operation time	About 60 (no fiber cut)	About 60 (no fiber cut)
Insertion loss	≤ 0.15dB (1310nm & 1550nm)	≤ 0.15dB (1310nm & 1550nm)
Return loss	≤ -40dB	≤ -40dB
Fastening strength of naked fiber	> 5N	> 5N
Fastening strength of naked fiber holer	> 10N	> 10N
Tensile strength	> 50N
Using temperature	-40 ~ 75°C	-40 ~ 75°C
Repeatablility (10 times)	△ IL ≤ 0.2dB △ RL ≤ 5dB	△ IL ≤ 0.2dB △ RL ≤ 5dB

Note: For the necessity of improvement, the material contained in this document is subject to change without notice.

Top