OPTICAL FIBER ALIGNERS (V GROOVES)
SUN-AL-A Series |
SUN-AL-B |
1. SUN-AL-A Series V Groove Aligners
Features:
• Suitable for all types of fiber (single fiber or ribbon fiber) temporary connection
• Suitable for 0.9mm to 0.25mm diameter fiber buffer
• Typical connection loss 0.25dB (SM fiber with matching gel)
• Easy operation |
Specifications:
• Application (Fiber type):
SUN-AL-A01: 0.25 ~ 0.25mm
SUN-AL-A02: 0.9 ~ 0.9mm
SUN-AL-A03: 0.9 ~ 0.25mm
• Dimensions: 50 x 50 x 50mm
• Weight: 350g |
|
Operation (step by step):
1. Stripping the fibers
2. Cleaning the fibers
3. Cleaving the fibers
4. Aligning the fibers in V groove
|
2. SUN-AL-B V Groove Aligner
Features:
• Two adjustable positioners applied to all kinds of fiber coating
• Typical connection loss 0.5dB (SM fiber with matching gel)
• Compact and easy operation
Specifications:
Fiber Type |
Single Fibers: 0.25 to 0.9mm coating diameter,
0.125 clad diameter |
Average Loss |
SM fiber: 0.5dB |
Applicable Fibers |
SM, MM, DS, NZ-DS optical fibers |
Cleave Length |
10mm |
Operating Environment |
Temperature |
0℃~40℃ |
Humidity |
90%RH (40℃, non-condensing) |
Storage |
-20℃~60℃ |
Dimensions |
80mm (D) * 80mm(W) * 25mm (H) |
Net Weight |
370g |
3. SUN-AL Series High-Precision Fiber Aligners (V Grooves)
Usage Instructions:
SUN-AL Series High-Precision Fiber Aligners are mainly applied to the active coupling connection
of bare fibers in Fiber Testing, experiment, constructions and Single-deck Testing of Fiber Optic
Cable, which is simple structure, reliable and easy control.
Construction Features and Technical Data:
Adopt high precision V-Groove to position optical fiber, make two fibers collimation connection.
• Insertion Loss < 0.25dB(same single-mode optical fiber)--SUN-AL-A
• Insertion Loss < 0.5dB (same single-mode)--SUN-AL-B
Applications and Attentions:
Step 1: Prepare Optical Fiber Fracture Section
a). Firstly, strip coating (about 40mm) of optical fiber by using Bare Fiber Stripper;
b). Put some absolute alcohol on absorbent cotton and then wipe the duct on bare fibers;
c). Cut the fibers by Ruby Knife or Fiber Cutter, left 10mm bare fibers.
Step 2: Settle Optical Fiber
a) Put the prepared bare fiber into V-Groove from the left side, make its fracture surfacein the
middle of the V-Groove;
b) Put down the Platen and hold the fiber;
c) Put another prepared bare fiber into V-Groove after dipped some matching fluid;
d) Put ahead to make the two sections connected tightly;
e) Put down Middle Platen and then the Right Platen.
Step 3: Attentions:
Don't crash or scratch the High-precision V-Groove by any hard object in order to avoid
damage on Groove and then to influence precision of the connection.
Wipe the dust in V-Groove by Alcohol Swabsticks every time before use.
