Connector Interferometer
SUN-FCI2010 fiber interferometer is independently developed by SUN TELECOM, used to measure radius of curvature, Apex offset, Fiber Height and polishing angle of APC connector, in the meantime, show the topography of the connectors and fiber ends directly and clearly.
The main parts of SUN-FCI2010 include interferometer, Lenovo table business computer and software set.
SUN-FCI2010 adopts 650nm high power LED Light source, which ensures user get clear intervene picture.
SUN-FCI2010 offers two kinds of chucks (2.5mm universal &1.25mm universal), with which user can test almost all kinds of connecters. 2.5mm universal used to measure FC/PC.SC/PC.ST/PC, E2000/PC, DIN, FC/APC, SC/APC kinds of connector, 1.25mm universal used to measure LC/PC, MU/PC, LC/APC kinds of connecters, and you don't need to replace chucks and calibrate when you transfer between APC and PC connector measurement, only adjust "angle adjuster" to relative angle is in need, very convenient to operate.
SUN-FCI2010 software has features of accuracy, high repeatability and convenient operability. Before initial test, user should calibrate the machine first. It's very easy to perform for SUN-FI2010. When you land to calibration interface, turning six points averagely on the whole round surface to measure six times, then click "ok" button, it will be automatically calibrated. You don't need to adjust hard device by yourself, as the software will calibrate inner settings automatically.
User can start test accordingly, only click "measure" button can finish one test, the test result and six historical figures will be shown under the analysis chart user could decide to save the result or not. If yes the figures will be saved in excel format, and it will judge if the result qualified or not automatically according to user's criteria or default criteria. In the meantime, the topography of the fiber or connector will be shown on the screen by 3D mesh diagram as well as contour diagram and surface roughness diagram.
Technical Specifications:
| Repeatability |
ROC |
0.3 |
| Fiber height (nm) |
8 |
| Apex offset (um) |
2 |
| Angle |
0.02deg |
| Stability |
ROC (mm) |
0.5 |
| Fiber height (nm) |
12 |
| Apex offset |
5 |
| Angle |
0.03deg |
| Working Temperature (°C) |
-10 ~ 30 |
| Zoom Time |
10X |
| Resolution (um) |
1 |
| Wavelength (nm) |
650 |
| Power Supply (V) |
12 |
| Dimensions (cm) |
44 x 22.5 x 17.5 (L x W x H) |
Standard Components:
1. SUN-FCI2010
2. PC or Notebook (with bounded software)
3. 2 x chucks(LC universal, and SC Universal)
4. 2 x APC locator clamps(FC/APC, SC/APC)
5. 2 x calibration connectors + Standard Utensil
6. 1 x Toolset
7. RS232 Cable
8. Power Cable
9. Software set
10. User Manual
Note: For the necessity of improvement, the material contained in this document is subject to change without notice.
(English)
